| |
 |
US TOLL FREE: 602-343-1496
|
|
| |
You are at
OEQuest : Optilab : 11. EYDFA Amplifier : Polarization Maintaining, EYDFA Amplifier : 40 dBm, Er/Yb Fiber Amplifier, Rackmount, Polarizing Maintaing for CW
| 40 dBm, Er/Yb Fiber Amplifier, Rackmount, Polarizing Maintaing for CW |
|
 |
The Optilab EYDFA-40-PM-R is designed to amplify optical signals up to 10 W average power for high power applications at 1550 nm wavelength range. The EYDFA-40-PM-R incorporates two stages of amplification based on multi-mode pumping technology using Er/Yb double clad fiber technology, with PM input and output. The optical gain of the EYDFA-40-PM-R can exceed 50 dB by adding an optional pre-amplifier EDFA, which allows a low input signal level of -20 dBm. It utilizes large core fiber technology to remove raman scattering, which causes nonlinear amplification. The EYDFA-40-PM-R is equipped with RS-232 for user interface and remote control. The EYDFA-40-PM-R can be ordered with PM collimator and other options. Contact Optilab for more information.
Features
➤ Amplifies from 1540 nm to 1570 nm
➤ High Gain of 50 dB with optional pre-amp.
➤ Up to 10 W CW output power
➤ PM input and output
➤ Optional PM collimator
➤ Large core fiber technology
➤ Mid-stage ASE filter
Downloadable PDF Datasheets:
EYDFA-40-PM-R Datasheet
Downloadable Images:
EYDFA-40-PM-R Image (1455770 bytes)
 Manufacturer: Optilab
Part Number: EYDFA-40-PM-R
Shipping Weight: 0.00 lbs
Lead Time:
6-7 Weeks
Base Price: Contact Sales
|
| Technical Specifications |
| Model Number |
EYDFA-37-PM-M
|
| Operating Wavelength Range |
1533-1565nm
|
| Output Power |
+37dBm minimum
|
| Input Signal Level |
-6dBm to +3dBm
|
| Optical Gain |
39dB @ -3dBm, typical
|
| Noise Figure |
5.0dB @ 0dBm, typical
|
| Input Isolation |
30dB typical
|
| Output Isolation |
30dB typical
|
| Polarization Exinction Ratio |
20dB typical
|
| Control Mode |
ACC Standard, APC (optional)
|
| Environment / User Interface |
|
| Display |
LCD: Output Power, Pump Laser Current
|
| Controls |
Keylock Switch, Pump Laser Current, LOS Threshold Level
|
| Monitors |
Input Power, Output Power, Loss of Signal (LOS)
|
| Protection |
Pump Laser Over-Temperature
|
| Computer Interface |
RS232, Labview software CD-ROM included
|
| Optical Fiber Type |
Fujikura PANDA
|
| Optical Connectors |
FC/APC, FC/UPC
|
| Electrical Connector |
RS232 - Cable Included
|
| Power Supply |
12VDC Typical
|
| Dimensions |
250mm(L) x 250mm(W) x 70mm(H)
|
| Operating Temperature Range |
0˚C to +50˚C
|
| Storage Temperature Range |
-10˚C to +70˚C
|
|
|
|
|
|
|
|
|
|
|
|
