Equipment
· ASE, SLED Sources
· FBG Sensor
· Fiber Laser Sources
· Optical Fiber Amplifiers
· RFoG, FTTH, HFC
· Transmitters / Receivers
Components
· DWDM Mux, Add/Drop
· Laser Diodes
· Optical Modulators, VOA
· Passive Components
· Patch Cords / Adaptors
· Photodiodes / Receivers
· Transceivers GEPON, FTTH
· Tunable Filters / Switches
· WDM, Optical Filters
Test Instruments
· Digital, Optical Networks
· Electronics, RF, Microwave
· Photonics Components
· Testing Chamber
Production Tools
· Laser / Fiber Assembly
· Motion Control/Alignment
Special Deals
Manufacturers
| |
|
You are at
OEQuest : Components : Optical Modulators, VOA : Modulator Drivers, RF Amplifier, Digital or Analog : 12 GHz RF Amplifier Module, 30dB Gain, Including Gain Control & Power Supplies
| 12 GHz RF Amplifier Module, 30dB Gain, Including Gain Control & Power Supplies |
|
 |
The MD-12-M is a 12 GHz Bandwidth RF Amplifier in a compact and user friendly module. The MD-12 modulator driver provides a high-quality, single-ended voltage to drive an external LiNbO3 modulator. Typical applications include driving EML, EAM, and Mach-Zehnder modulators. It amplifies 12.5 Gb/s data input signals to >7.5 Vp-p drive levels. The flat gain and flat group delay response yield a highquality, low-jitter electrical drive signal. The MD-12-M can also be used as wideband RF amplifier with useful bandwidth of up to 15 GHz. Its high gain of 26 dB makes it suitable for many RF link applications.
The MD-12-M has an anadized, precision-machined aluminum housing that is designed for efficient heat dissipation. The output voltage can be ajusted by an internal resister for 10 dB range. The module has K-connectors for the input/output RF signals and an seven-pin connector for the detector, reference, and power interfaces. Included is a 12 V DC power supply which
is all that is needed to power the MD-12-M.
Features
• Useful Bandwidth up to 15 GHz
• Data rates upto 12.5 Gb/s
• Compact Size
• Variable Gain Control Built-in
• Single 12 V Power Supply Included
Applications
• 12.5 Gb/s Digital Modulation
• SONET/SDH
• Analog RF Amplification to 15 GHz
• RF over Fiber Link Amplified
• General Laboratory Testing
Downloadable PDF Datasheets:
MD-12 Product Datasheet
Downloadable Images:
MD-12 Side (0 bytes)
MD-12 Above (0 bytes)
 Manufacturer: Optilab
Part Number: MD-12
Shipping Weight: 0.25 lbs
Lead Time:
In Stock
Base Price: $1,395.00
|
View a printable version.
| Technical Specifications |
| Model Number |
MD-12-M
|
| Data Rate |
Up to 12.5 Gb/s
|
| Frequency Response |
75 KHz to 15 GHz
|
| Output Amplitude |
7.5 Vp-p typ.
|
| Output Power |
>26 dBm typ.
|
| RF Gain |
14 db to 26 dB, variable
|
| Gain Ripple |
±1.5 dB
|
| Gain Control Range |
10 dB min.
|
| Group Delay |
± 25 ps
|
| Noise Figure |
11 dB
|
| RF Impedance |
50 Ω
|
| Input Range |
500 mV to 1.5 V
|
| Input VSWR |
1.6:1 typ.
|
| Output VSWR |
2.0:1 typ.
|
| Rise Time |
10%, rise time 35 ps typ.
|
| Output Coupling |
AC Coupled
|
| Environment / User Interface |
|
| RF Connectors |
K Connector Female
|
| Electrical Connectors |
7-Pin Assembly
|
| Power Requirement |
+12 V DC, 1 A max.
|
| Dimensions |
80 mm x 50 mm x 25 mm
|
| Soldering Temperature |
215˚C maximum for 30 seconds
|
| Operating Temperature Range |
0° C to +70° C
|
| Storage Temperature Range |
-45° C to +100° C
|
|
|
|
|
|
|
|
|
|
|
