Equipment
· ASE, SLED Sources
· FBG Sensor
· Fiber Laser Sources
· Optical Fiber Amplifiers
· RFoG, FTTH, HFC
· Transmitters / Receivers
Components
· DWDM Mux, Add/Drop
· Laser Diodes
· Optical Modulators, VOA
· Passive Components
· Patch Cords / Adaptors
· Photodiodes / Receivers
· Transceivers GEPON, FTTH
· Tunable Filters / Switches
· WDM, Optical Filters
Test Instruments
· Digital, Optical Networks
· Electronics, RF, Microwave
· Photonics Components
· Testing Chamber
Production Tools
· Laser / Fiber Assembly
· Motion Control/Alignment
Special Deals
Manufacturers
| |
|
You are at
OEQuest : Components : Optical Modulators, VOA : Modulator Drivers, RF Amplifier, Digital or Analog : 12.2 Gb/s Optical Modulator Driver, Female K-Connector In/Out
| 12.2 Gb/s Optical Modulator Driver, Female K-Connector In/Out |
|
 |
The JDS Uniphase H301 optical modulator driver provides a high quality, single-ended voltage to drive an external laser modulator. Typical applications include driving EML, EAM, and Mach-Zender style modulators. The flat gain and flat group delay response yield a high quality, low jitter electrical drive signal. The driver meets applicable SONET and SDH standards for OC-192 10 Gb/s optical transmitters and includes reference and detector outputs to enable external temperature compensated control of output drive levels. Features:
- 3-stage RF design
- For digital modulation from 10 Mb/s to 12.5 Gb/s
- 3 dB RF bandwidth from 75 kHz to 11 GHz
- High output power of 24 dBm
- RF gain of 26 dB
- Can be used for linear / analog modulation
Downloadable PDF Datasheets:
JDS Uniphase H301 Series
Modulator Application Block Diagram
Downloadable Images:
Larger Image (822680 bytes)
 Manufacturer: JDSU
Part Number: H301-1210
Shipping Weight: 0.25 lbs
Lead Time:
In Stock
Base Price: $695.00
|
View a printable version.
| Technical Specifications |
| Model Number |
H301-1211
|
| Data Rate |
Up to 12.2 Gb/s
|
| Frequency Response |
75 kHz to 10 GHz
|
| Output Amplitude |
7.0 Vp-p typical, 7.5 Vp-p maximum
|
| Output Power |
24 dBm minimum
|
| RF Gain |
14 dB to 26 dB, variable
|
| Gain Ripple |
+/-1.5 dB
|
| Gain Control Range |
12 dB typical
|
| Group Delay |
+/-25 ps typical, 2 GHz to 10 GHz
|
| Noise Figure |
11 dB
|
| RF Impedance |
50 Ohm
|
| Input Range |
500 mV to 1.5 V
|
| Input VSWR |
1.6:1, 200 kHz to 10 GHz
|
| Output VSWR |
2.0:1 typical, 3.0:1 maximum
|
| Rise Time |
40 ps maximum
|
| Output Coupling |
AC Coupled
|
| Environment / User Interface |
|
| RF Connectors |
2.9 mm K-type
|
| Electrical Connectors |
8-pin
|
| Power Requirement |
8.0 VDC @ 600 mA -5.0 VDC @ 22 mA
|
| Dimensions |
1.2 in (L) x 1 in (W) x 0.5 in (H)
|
| Soldering Temperature |
215˚ C maximum for 30 seconds
|
| Operating Temperature Range |
0˚ C to +70˚ C
|
| Storage Temperature Range |
-40˚ C to +100˚ C
|
|
|
|
|
|
|
|
|
|
|
